Basic features of semi-automatic box gluer

Semi-automatic box gluer can be divided into two types: the first one is widely used in China, mainly used for folding, gluing, shaping, conveying, pressurizing, counting, drying and other functions of cartons. The whole machine is controlled by the feeding department. , Gluing part, shaping part, conveying and pressing part, receiving and counting part, etc. The operating procedure is that the worker manually folds the processed whole piece of cardboard and sends it to the gluing department. The gluing department automatically applies glue on the bonding part of the cardboard, and sends it to the shaping department through a roller to shape it one by one to a certain amount, and then automatically transfer it. Press, blow dry and finally wait for completion. This semi-automatic box gluer is suitable for standard double-folding and flapping one-piece outer packaging boxes, and it is required that the carton must be pressed along the corrugated "half-folding line", otherwise the glued carton may produce waste. This machine is very suitable for cardboard after die-cutting. The maximum folded cardboard size is 1200mm×1200mm, the smallest is 400mm×400mm, and the production speed is 50 to 70 pieces per minute.

Another type of semi-automatic box gluer is developed by the structure of the box gluer. This box gluer is composed of an automatic feeding part, a grinding and gluing part, a conveying part, and a manual folding and pressing part. The worker folds and presses it manually, and then puts it in the air pressure working part to press it when it reaches a certain amount. It is characterized by the fast automatic feeding speed of the feeding part, but it cannot send folded cardboard, only flat plates. The feeding part of this box gluer is similar to the front paper feeding structure. It is fed by special tape, rollers, etc. At the same time, it can also complete the bonding of two pieces of cardboard, and it can also complete the bonding of special-shaped cartons, partial boxes and other special cartons. Its grinding and gluing work department can accurately roughen and glue the parts that need to be glued, and it can also use the nozzles equipped with the machine to spray glue locally on the special-shaped boxes. There are 12 working positions on both sides of the machine, and 12 workers can perform production operations at the same time, and the production speed is also considerable.